Description
The Malfunction Detector “PS-682” detects the status of automatic pressing, such as material shortage, material feeding, discharge of processed goods, and outputs a stop signal to the press in case of trouble.
Several functions using timing signal, such as counting, calculation of work rate, error recording, will assist you in production control.
PS-682 supports Ethernet to connect with a personal computer or PLC.
It employs DIN connector and remotely operable light sensor can be used. Since a voltage of 12V or 24V is outputted, a 24 V sensor can be used as well as conventional light sensor.
Features
While the features of our “PS-661/662” remain as they are, the following features are added
| Improvement of operability by LCD – Detecting method can be freely set for all channels.- Total counter, preset counter and setting values can be seen at a glance. – Work rate and SPM are indicated. – Allowance angle is indicated (patent pending). – Displaying the number of counts of extraction. – Displaying an error information. | |
| Provided with helpful functions for production control – Up to 99 patterns can be registered.- A record of up to 500 errors and counter outputs can be saved. – Calling pattern by ID tag (optional) is available. | |
| Ethernet supported – The setting or the like in HTML format can be checked.- The saved record can be downloaded in CSV format. – Various types of setting and operation are available through Telnet communication. (communicate via PLC) | |
| Enhancement of sensor feature – The sensitivity of OS series can be adjusted by addition of communication line.- Detection will be ON automatically or it gives stop output when it gets sensor input while detection is ON. – Various types of sensor can be used, because a voltage of 12V or 24V is outputted. |
Dimensions
Back view
Specification
| Item | Specifications | |
| Detect | Channels | 6 Channels |
| Detect mode | Touch, Synchronization, Passage, Feed, Extraction, Timer, Counting feed | |
| Power source for sensors (by the total) | 12VDC (Max. 500mA) 24VDC (Max. 200mA) | |
| Output response time | Max. 10 ms | |
| Counter | Digits | Total Counter:6 Preset Counter:6 |
| Output response time | Max. 10ms | |
| Input/output | Power source voltage | 100 to 240 VAC ±10%, 50/60Hz (Max. 40 VA) |
| Relay output | EMG Stop, TDC Stop, READY, ALARM (Max. 250 VAC / 30 VAC 3.0A) | |
| External input | ON/OFF, RESET, LOCK,TIMING (T1, T2, T3) | |
| Sensor input | No-voltage contact 3-wire NPN open collector | |
| Ethernet | Physical layer | 10BASE-T/100BASE-TX |
| Protocol | IPv4 DHCP, HTTP, TELNET | |
| Others | Temperature | 0 to 55°C (must not be sudden change while using it) |
| Humidity | 35 to 85%RH (no dew condensation allowed) | |
| Dimensions of the body | 200(W) × 120(H) × 190(D) excluding projections | |
| Weight | 3.4 kgW (inc. mounting bracket) | |
DIN-plug conversion cable
PS-682 is adopting new connector differ from conventional product.
It is necessary DIN-plug conversion cable to PS-682 to use the sensors used for conventional product.DIN-plug conversion cable is provided when select 「01」 at the order code of accessory of sensor of PS-682.It is possible to purchase only DIN-plug conversion cable.The color and cable length of DINP-1J are fixed.
If you need to change the color or cable length of DINP-1J, please place an order by USE-DE series.
Reviews
There are no reviews yet.