Malfunction Detector SD-101
Features
With 4 detection channels, it can be used alone or in combination
The interface is simple, clear, easy to understand and easy to operate
It has many modes for operation
Indicator light shows abnormality, reset button operation is easier
Very safe to use. Signal output, device shell are all passive electric shockproof, safer to use
| “A” Corrugation Extrusion | Detecting Rod: ”ON” Contact Check |
| “B” Feeding Out | Detecting Rod: ”OFF” NON-Contact Check |
| “Synchro” Shortage of feeding Distance of feeding | Work with the feeding time of the machine to check feeding checking point is fixed at 90° .(TM yellow lamp).The material must be fed at right place before brightening of TM lamp. IF not, the machine stops. |
| “Memory” Discharging workpiece | On every pressing stroke,it must has a workpiece to pass the detecting device(photoelectric,magnetic,micro,proximity switches,etc.)which outputs a checking signal to the controller to store(“MY”green lamp). TM lamp brightens and eliminates the memory if NO workpiece passes. The machine stops. |
| Detecting Device | Proximity,photoelectric,infrared detection switch(DC 12V,built-in amplifier),and the detecting rod,micro-switches. |
| SD-101 | SD-102 | ||
| CH1-2 | Check corrugation and extrusion of materials (“A”position)check feeding out(“B”position). | CH1 | Check corrugation and extrusion of materials (“A”position)check feeding out(“B”position). |
| CH3 | Check shortage of feeding, distance of feeding (“Synchro”position) using proximity switch, photoelectric switch. | CH2 | Check the orientation. Using the optical fiber. |
| CH4 | Confirmation of discharging workpieces. Using SD-201/202. | CH3 | Check shortage of feeding, distance of feeding (“Synchro”position) using proximity switch, photoelectric switch. |
| CH4 | Confirmation of discharging workpieces. Using SD-201/202. | ||
Specifications
| SD-101/102 | SD-201/202 | ||
| Channel | 4.check individually | Checking amplitude | （Infrared detection） SD-201：MAX 150mm SD-202：MAX 100mm |
| Switches | A/B,memory/synchronize | Minimum check | φ2mm(checking distance:0.5M) opacity |
| Response time | “ON”check:3μ,”OFF”check:<300μ | Checking distance | <500mm |
| Power supply | AC85V~250V、50/60Hz±10% | Power supply | DC12V(±10%) |
| Power consumption | <16W | Power consumption | <60mA |
| Output signal | Relay/A/B(220V3A),(110V8A) | Indicating lamp | Green:POWER , Red: GO |
| Delayed time | <10ms | Sensibility | Adjusted by the shape of material and distance |
| Applicable temperature | 0℃~40℃ | Applicable temperature | 0℃~40℃ |
| Input signal | DC12V、detecting device | Response speed | <1ms |
| Standard accessories | SD-101： Detecting rod 2pcs;proximity switch 1set;length of join cable 2pcs SD-102： Detecting rod 4pcs;proximity switch 1set;length of join cable 2pcs | Length of joint cable | 2.5M |
| Dimensions | 175W*212L*100H | Dimensions | 40W*210L*180H |
| Weight | 2.65kg | Weight | Main unit:1.2kg/Reflective plate :0.3kg |
Reviews
There are no reviews yet.